Guide's Edition Paragon
Everything you buy from us here at TOM BIHN is satisfaction guaranteed. We’ve been in business for over 30 years and we stand behind what we make.
If something goes wrong and it's our fault, we'll fix it for free. Repairs due to normal wear and tear or due to other things that are not our fault will be performed, when possible, at a reasonable charge right here in our Seattle factory where your bag was made. Defects in materials or workmanship are uncommon and almost always evident while the product is still new. Keep in mind that bags and packs are often subject to extreme wear in everyday use: do not expect them to last forever. Only true love lasts forever! You can expect a TOM BIHN product to give years and years of hard service.
Our masks are satisfaction guaranteed. Please email@example.com if you're happy with your mask *or* there's something that doesn't work for you. We want to hear from you!
Cut and Sewn in Seattle
Our bags and face masks are designed and cut & sewn right here in Seattle, Washington, U.S.A.
That allows us to be control freaks in the best way possible; we have direct control and oversight of the quality of our materials, our products, and the jobs and working environment that we help create. It also offers us a unique spontaneity: when we have an idea for a new product or accessory, we can design it, figure out how to build it, add it to our website and be ready to ship it out our front door all within just a few weeks. How cool is that?
Intrigued? You can more about the unusual way we do business on our Company Philosophy page.
|bluesign® certified 525 denier Ballistic exterior fabric|
|bluesign® certified 210 denier Ballistic lining fabric|
|Closed-cell foam back|
|.25" / 6 mm thick foam padding laminated between coyote, heavy-duty polyester knit and brushed tricot for the laptop pocket|
|Edgeless EV50 1/2” / 12mm shoulder straps (EVAZOTE® OEKO-TEX® foam)|
|#8 YKK coil zipper with metal sliders |
#5 YKK coil zipper with plastic sliders
|Tough Duraflex®, Nexus, and Woojin buckles and related components|
|Sewn in USA with globally sourced materials|
|100% finished seams|
|Dimensions: 13.4" (w) x 17.9" (h) x 6.8" (d) / 340 (w) x 455 (h) x 175 (d) mm|
|Weight: 1 lb 7.7 oz / 672 grams|
|Volume: 1200 cubic inches / 19.8 liters (ASTM Standard Measure)|
|Maximum device dimensions for the laptop compartment: |
14.09" x 9.68" x 0.64" / 357.9mm x 245.9mm x 16.2 mm
|What's Included: |
1x 8-inch Coyote Webbing Snaphook/Snaphook Key Strap
1x Coyote 8-inch Cord-Only Zipper Pulls (8-Pack)
1x Removable 1" / 25 mm waist strap
1x Removable .75" / 20 mm sternum strap
|Total O-rings: 4 (2 in the main compartment, 1 in the interior pocket, 1 in the front pocket)|
|Want to see the specs for all of our bags?|
Diagonal Zipper Pocket >> Horizontal Zipper Pocket
Yes, I know, the diagonal zippered pocket is part of the classic look and many of my packs from the 70’s, 80’s, and 90’s featured that. Let's face the facts: it's 2021 and we're carrying various electronic devices. I found that sliding my tablet into the diagonal zippered opening didn’t really work. It’s just easier to get all kinds of stuff in and out of a horizontal zipper front pocket — and, after all, isn’t that what a pocket is for?
Padded Back Panel
Padded back panels were not the norm back then, but we’ve all come to expect them now – partly because we now tend to carry laptops or tablets. Which of course leads to.....
If you’d like some padding for your tablet or you carry a laptop, you can stow one or the other in the minimalist built-in laptop compartment of the Paragon. It’s a straight-forward pouch of the same foam laminate that we use to make our Caches, and is accessed inside the main compartment. Fits the 16" MacBook Pro and Dell XPS 17" and, of course, any devices smaller than those two. (And to be able to fit those bigger laptops, I did have to make the Paragon more square and less oval than the original Simplex and Duplex packs.) Now don’t get all mad if you don’t carry a laptop: that compartment also provides additional padding for your back.
Edgeless Shoulder Straps
Conformity is overrated — except, perhaps, when it comes to shoulder straps. The edgelessness of this strap allows it to more softly conform to your shoulder; we find that this increases comfort. Yet the straps aren’t too soft: the 1/2” thick EVAZOTE® OEKO-TEX® certified foam means the strap is robust enough to carry a heavy load.
Here’s what’s different in the Guide’s Edition Paragon:
- The Guide’s Edition Paragon is trimmed and lined in Coyote brown; brown blends in more readily with natural surroundings and doesn't show dirt as much. When it does get a bit dusty or dirty, it looks like it's supposed to.
- One diamond accessory strap holder on the top front and a corresponding ice-axe loop below, allowing you to carry an ice axe for high-country, early-season mountaineering or a tripod for urban photography. If you go that route, or think you're gonna secure something else similar to the front make sure to pick up an optional Ice Axe Lash Strap.
- Two diamond accessory strap holders on the bottom of the bag. If you opt for the optional Lash Straps (sold in pairs), you can secure foldable hiking poles, an ultralight folding chair, icy gaiters or a wet raincoat to the bottom of the pack.
- An official Leave No Trace tag with a TOM BIHN Coyote Key Strap Snaphook; the tag lists the 10 principles of Leave No Trace. The Leave No Trace Center for Outdoor Ethics is one of the organizations we support through our commitment to 1% for the planet.
And that’s not all: the Paragon has one interior zippered pocket and includes a simple (and removable) sternum strap and waist belt.
I unearthed this pack design around the beginning of the pandemic — we had talked about debuting a new design that would be something fun we could share with all of you sooner rather than later. (That sooner months and months later turned into this later: we became surprisingly busy at the factory sewing masks and ended up not having the time to debut the Paragon.)
I wanted it to be something that’d be pretty easy to cut and sew — in early 2020, things were changing quickly, and one of our crazy brainstormed ideas was that Darcy would learn to cut fabric, Nik would sew bags at the factory, and I would sew bags at home in my garage workshop. We’re nowhere near as skilled as the production crew, so, yeah: simple would be better. Bonus points if it wouldn’t take me all that long to design. Pulling a design from the archives — one I’d patterned, cut, and sewed when I was something like 14 — made sense. (There’s a couple of other simple designs from the 70’s/80’s/90’s that we’ll be reissuing this year: stay tuned…) Of course, we’ve abandoned this quixotic idea of the three of us pretending to be a factory, but out of that pipe dream we did get the Paragon. :)
Folks who love our Daylight Backpack but wanted some laptop protection, a padded back, and replete-with-comfort shoulder straps will appreciate this pack. Folks who like the organization of a pack like the Synik or the mega-capacity of a pack like the Brain Bag may want to stick with those. Those who like simplicity, classic design — they’ll find much to appreciate here (precisely because there’s less.) Those who want to see innovation — well, this is a pack about where we came from, not where we’re headed.